What homeowners say
WethersField SolarWethersfield, Connecticut
Serving Wethersfield and central Connecticut
★★★★★
Private website concept.
Wethersfield, Connecticut
Wethersfield Solar installs solar for homes in Wethersfield, CT, including the historic district. For each roof we draw two priced layouts, each showing panel count, size, production estimate, shade assumption and price per watt, so you can weigh what the Historic District Commission and your budget allow before you sign.

Wethersfield, Connecticut
WethersField Solar installs, maintains and supports solar energy systems for homes and businesses across Wethersfield and the Connecticut River valley. We size every system to your last twelve months of Eversource use, price it per watt, and stay on the system long after it is switched on.
What homeowners say
Serving Wethersfield and central Connecticut
★★★★★
What we do
Part of the family
WethersField Solar is a division of Soltura Solar. Each business page operates under its own brand and its own name, and all of them are part of the Soltura Solar family.
Visit, call or write
| Phone | (959) 207-4528Mon–Sun, 8am–6pm. Ask for the design desk. |
|---|---|
| info@wethersfieldsolar.comSend your last twelve months of usage and we will size it. | |
| Office | 449 Silas Deane Hwy, 3rd Floor, Ste 302E, Wethersfield, CT 06109Parking on site. |
| Hours | Mon–Sun, 8am–6pmEvening appointments by request. |
What to expect
Our story
WethersField Solar opens in Wethersfield with residential and commercial divisions.
Battery storage and municipal work join the service list.
Historic-district work: rear-only layouts prepared for the HDC review.
Two-layout quoting. Every home gets a rear-only plan and a higher-output plan, priced separately.
Where we work
Pick a sample roof condition. Both plans use the same roof and the same example panel, so you can see what placement alone changes.
Plan A
Keep the panels together on the front face.
Plan B
Add a second group of panels on the rear face.
Ask for an annual energy estimate for each layout. The same panels can produce different amounts of energy on different roof faces.
Illustrative example. Each drawn panel uses an example rating of 400 W, so capacity is panel count × 0.4 kW DC. A site assessment would set real fit, production and price.
Two layouts. Step two is where we differ: you see two priced layouts before you choose one.
A roof visit: roof faces, shade, the electrical panel and your last 12 months of use.
Plan A and Plan B for the same roof, each with panel count, DC capacity, a yearly estimate and a price.
The layout you choose, priced line by line against its drawing.
The town building permit, plus historic or zoning review where the address needs it.
Mounts, panels, inverter and wiring, built to the approved drawing.
The interconnection application and the utility's approval to switch on.
Monitoring, warranty papers and who answers questions, agreed before you sign.
On September 9, 2025, Wethersfield's Historic District Commission reviewed a solar application with two options: panels on the front and rear roofs, or panels on the rear roof only. According to the minutes, the rear-only option would cover only about 55% of the home's electricity use. The commission approved rear-only, with no forward-facing panels, as the minutes of that meeting record.
That is one decision about one house, not a town rule. Still, it shows what a single quote can hide. The roof face that produces the most power may be the face the commission, or you, would rather keep clear. If your only proposal depends on that face, you find out after the price is set.
The commission reviews exterior changes in the Old Wethersfield Historic District. The town describes it as the largest historic district in Connecticut: created in 1962, with more than 150 structures built before 1850. Where a house's sunniest slope faces the street, the choice between output and appearance is real.
How we quote. Wethersfield Solar starts every home with two layouts:
Both layouts use the same panel model, the same 12 months of your Eversource usage and the same method for estimating production. Only the panel positions change, so the two prices compare line by line. You pick one and sign a scope for that layout only.
Wethersfield Solar works across Wethersfield and the surrounding towns. Nothing on this page is a quote, a license claim or a promise that any layout will be approved.
Before anyone prices a layout, find out what they measured. Our assessment has two parts.
Desk review, before the visit. We pull aerial imagery and the parcel record, check whether the address sits inside the historic district or a homeowners' association, and read your last 12 months of Eversource usage. We also look up the roof's age in the town's permit record, a check the U.S. Department of Energy suggests. The DOE notes that replacing an aging roof at the same time as installing solar can save money, so roof age belongs in the conversation before any layout is drawn.
Site visit (about 1 to 2 hours, illustrative duration). The visit would cover:
If the roof needs work soon, ask for that scope as a separate line, not folded into the solar price.
Each layout comes with a one-page sheet showing six fields:
Each layout would also come with a to-scale drawing showing panel positions, the conduit route and the inverter location. The inverter converts the panels' direct current into household alternating current. The wiring is on the drawing for a local reason: the Historic District Commission's solar application checklist asks for a rendering of the property with the panels and all electrical work, including conduit and the panel box. A drawing that leaves the wiring off is not ready for the commission.
The written proposal would add:
The chosen layout's drawing would become the base of the permit plan set. Towns ask for different things here: Newington, for example, asks for two plan sets for a one- or two-family home.
Optional extras, priced separately under the proposal: a street-view rendering for commission review, a professional engineer's structural letter, a main-panel upgrade quote and a battery quote.
Illustrative calculation: assumptions. Every figure below is an example, not a price or estimate for any real home. Both layouts use the same 410-watt panel. The household uses 12,000 kWh a year (example figure). Production before shade uses 1,294 kWh per kW DC per year, EcoGen's statewide production factor for Connecticut, which assumes an unshaded roof. A real proposal replaces it with a site estimate built from your roof's direction, tilt and measured shade.
| Illustrative calculation | Layout A: rear faces only | Layout B: rear plus street-facing |
|---|---|---|
| Panels | 14 | 26 |
| Size (DC) | 5.74 kW (5,740 W) | 10.66 kW (10,660 W) |
| Production before shade (statewide factor) | 7,428 kWh/yr | 13,794 kWh/yr |
| Shade loss assumed | 8% | 12% |
| Estimated production | about 6,833 kWh/yr | about 12,139 kWh/yr |
| Share of 12,000 kWh usage | about 57% | about 101% |
| Solar-only price (example figure) | $17,500 | $28,900 |
| $/W (price ÷ DC watts) | $3.05 | $2.71 |
Read the table in three passes.
Start with what the second roof face buys. Layout B adds 12 panels and about 5,300 kWh a year, roughly 78% more production, at a lower price per watt. On paper, B wins.
Then look at shade. B carries a higher assumption here because it adds faces. Ask for each face's figure. A single blended number hides which face is doing the work.
Last, ask whether B can be built at all. The roughly 57% versus 101% split in this example mirrors the 2025 case, where rear-only was said to cover about 55% of the load. This example was not modeled on that house. But if your home is in the district and the commission would treat a street-facing array the same way, B's better numbers do not matter. Layout A is the one you would build, so its price needs checking as carefully as B's.
Run this check on every layout from every bidder. It takes three steps and a calculator.
1. Strip out the work that isn't solar. Remove roof replacement, structural reinforcement, a main-panel upgrade (a larger electrical service panel, sometimes needed before solar can connect) and any battery. Those can be worth doing, but they are not the price of the array. Rocky Hill's page walks through separating panel-upgrade work from the solar price.
2. Divide the solar-only price by the DC watts. $28,900 ÷ 10,660 W = $2.71/W (illustrative calculation, Layout B).
3. Compare with the state benchmark. EcoGen's Solar Cost Index puts Connecticut at $2.80/W (state benchmark), September 2026 edition, prices as of September 25, 2026, with typical quotes between $2.46 and $3.14/W (state benchmark range), according to EcoGen's Connecticut solar cost page. The figure is a modeled installed price per watt before incentives, a state benchmark rather than a quote for your home. EcoGen has no Wethersfield-level figure, so the state number is the right yardstick here.
Applied to the example:
| Illustrative calculation | $/W | Against the $2.80 state benchmark |
|---|---|---|
| Layout A, solar only | $3.05 | Inside the range, near the top |
| Layout B, solar only | $2.71 | Inside the range, below the benchmark |
| Layout B with a $2,800 main-panel upgrade folded in ($31,700) | $2.97 | Looks pricier, but the extra is not solar work |
A folded-in upgrade distorts the comparison: the same Layout B reads $2.71 or $2.97 depending on whether the panel work is listed separately.
Layout A's $3.05 is not a red flag by itself. Small arrays carry many of the same fixed costs as large ones, so their $/W tends to run higher. Compare it with another bidder's rear-only layout, not with their bigger one.
| Cost driver | Why it changes the price | What to ask |
|---|---|---|
| Array size | Eversource's application and meter fees, engineering and the inspection visit cost about the same for 14 panels as for 26, so they weigh more on a small array | Show $/W for each layout, not only the total |
| Roof faces used | Each added face needs its own shade figure, and in the district a street-facing face may need commission approval before it can be built | Which lines change if one face is dropped? |
| Roof condition and structure | The town's packet asks for an engineer's structural evaluation; reinforcement or a new roof is extra work | List roof and structural work as separate lines |
| Conduit route | Wiring can run through the attic or outside the house, and the commission asks to see exterior conduit | Where does the conduit run, and does the price change if it moves inside? |
| Main-panel upgrade | Tying into the house wiring needs an E-1 or E-2 electrician, and some panels need an upgrade before solar can connect | Is an upgrade included, and why is it needed? |
| Optional extras | Renderings, an engineer's letter or a battery add cost without adding solar watts | Priced separately, or bundled into the headline? |
Expect online figures to disagree. The directory pages that rank for Wethersfield solar searches quote price ranges that don't match each other and rarely say what the price includes. Permit-fee figures are not price benchmarks either: East Hartford values solar projects at $3.50 per watt to set its permit fee, which says nothing about what an installer should charge.
Every bidder should be able to describe this route by office name. Check what they tell you against the town's own documents below.
All building permit applications in Wethersfield now go through OpenGov, the town's online portal; the older City Squared system is retired. The Wethersfield Building Department page links both the portal and the town's solar instructions. The department is at 505 Silas Deane Highway.
The town's solar permit packet covers a building permit and an electrical permit. For a roof mount it lists:
That packet dates from 2020, before the move to OpenGov. Confirm with the Building Department, or your bidder, whether the portal still asks for the PE letter.
The commission comes first. The packet lists a typical order for roof mounts: Historic District Commission 15 to 30 days, then Zoning 1 to 5 days, then Building 1 to 5 days. The town says those times are not guaranteed.
The commission's approval is a Certificate of Appropriateness: written permission for exterior changes visible in the district. Besides the rendering, its solar checklist asks for the panel pattern, exterior conduit, a written description, addresses where the same company installed the same panels, and photos. The commission meets at 7:30 p.m. on the second and fourth Tuesday (not in December); the Building Department sets filing deadlines. The town's guidance recommends meeting the commission informally first and bringing clear visuals.
This is where Layout A earns its place. File with a layout you would accept if the street-facing faces are refused, or have a priced fallback ready. Two town documents list different application fees, so confirm the fee before filing.
Next door, Hartford runs historic review through its own portal before a building permit is issued.
Zoning and Building review follow without the commission step. If you live in an association that isn't a condominium or cooperative, Connecticut law (CGS §47-261b) stops it from banning panels on a roof that is yours alone, though it may set rules on size, attachment and upkeep.
Ground or pole mounts add Engineering and Inland Wetlands review and a second inspection; this page covers roof layouts.
Wethersfield is served by Eversource. Once a roof-mounted system passes its on-site inspection, the town's packet says the Building Department notifies Eversource within one business day. How Eversource pays for the power depends on a choice you make once.
Connecticut replaced net metering in 2022 with the Residential Renewable Energy Solutions program (RRES), overseen by the Public Utilities Regulatory Authority (PURA). It covers 1–4 family homes with systems up to 25 kW AC. You choose one of two tariffs when you enroll, it runs for 20 years, and you cannot switch later.
Eversource's 2026 rate table sets the terms for applications submitted in 2026:
| 2026 terms (Eversource) | Netting | Buy-All |
|---|---|---|
| How you are paid | Power you export is credited on your bill at the retail rate | A fixed rate for every kWh the system produces |
| Rate or charge | Solar Energy Adjustment charge of $0.0402 per kWh of total production | $0.3289 per kWh |
The Solar Energy Adjustment (SEA) is easy to overlook because it is charged on production, not exports. Under Netting it applies to every kWh your production meter records, including power your house uses directly. In the worked example, year-one SEA would be about $275 for Layout A (6,833 × $0.0402) and about $488 for Layout B (12,139 × $0.0402). Illustrative calculation only. Ask each bidder to show it.
Two Wethersfield-specific notes:
Connecticut has also started work on a successor program under Public Act 26-127, so terms for later enrollees may change.
Get this sequence in writing, with the name of whoever does each step. Under our plan, the town side runs:
Alongside those steps runs the Eversource RRES application, where you elect Netting or Buy-All. Ask each bidder at which step they file it and on what date, because Eversource ties the rates to the year the application is submitted.
No step comes with a promised date. The Department of Energy describes permits and inspections as taking weeks to months, and the town's listed review times are not guaranteed. A bidder who promises a switch-on date before the commission has met is guessing.
The Department of Energy's guide to buying a house with solar lists the records a future buyer will ask for. Keep them from day one:
In the district, keep the Certificate of Appropriateness with these papers. The 2025 approval required changes to go back to the commission first. Assume a visible change to your array may need review again, and check before adding panels.
Have every bidder price the same two layouts, then put these questions to each.
Layouts and price
Licenses and who does the work
Wethersfield and Eversource
The quote checklist on this site collects these questions, so every bidder gets the same list.
Is there still a 30% federal solar tax credit? No, not for a system you buy and own. The IRS says the Residential Clean Energy Credit is not allowed for expenditures made after December 31, 2025. Some directory pages still show the old credit, so check the date on any savings figure. This is not tax advice.
Can a house run 100% on solar? Over a year, on paper, sometimes. Layout B in the illustrative example produces about 101% of the household's 12,000 kWh. But a street-facing array in the district needs commission approval, and production in winter months is lower than in summer.
Is net metering still available in Connecticut? Not for new solar systems on Eversource. RRES replaced it in 2022, and new systems choose Netting or Buy-All for 20 years.
Each guide covers that town’s permit route and what to ask for in a quote. We work across all five towns.
Choose your town and what you want to compare. This private preview builds a checklist you can take to any installer. It runs on this device and nothing is sent.